Delter Coffee Press
SKU: DelterPress
VENDOR: Delter Coffee
Hurry up! Sales Ends In
Hurry! Only 50 Left in Stock!
Delter Coffee Press has been designed to solve one of the biggest problems in coffee brewing - agitation. To avoid a bitter and inconsistent extraction caused by uncontrolled agitation, the Delter Coffee Press uses a unique jet-seal. This seal keeps the brew water and the coffee grounds separated until the brew commences, preventing uncontrolled agitation. When pressure is applied to the plunger, water and coffee contact is activated, allowing agitation to occur for the first time. This design allows the user to have complete control over the water flow and agitation, resulting in a brew with less bitterness and more clarity.
Features:
- Jet Seal: Unique seal that prevents any unwanted agitation of the coffee bed during brewing.
Ā - Injection Brewing: The water and coffee are separate until you're ready to start brewing using injection brewing.Ā
Ā - Simple to Clean: All you need is a few minutes to wash with water
Ā - Portable: Weighing less than 250g, the Delter is ideal for camping, plane, travel, office or home.Ā
Ā - Pocketable Design: Compact and portable for coffee anywhere
To Brew:
To brew with the Delter Coffee Press, you need freshly roasted ground coffee andĀ water just off the boil
Ā 1. Place a filter in the Delter cap and rinse with water and discard.
Ā 2. Add freshly ground coffee into the Delter coffee chamber (max. capacity 30g).
Ā 3. Twist on the Delter cap.Ā
Ā 4. Flip the Delter over onto your cup and start pouring your hot water into the brew chamber, filling to the line markings.
Ā 5. Raise the plunger to dose the exact amount of water required for your brew.
Ā 6. Push down on the plunger to activate water and coffee contact.
Ā 7. Raise the plunger again to redose or refill the brew chamber for larger, double-batch servings.Ā
Ā 8. Enjoy!
Specifications:
Capacity: 400ml
Materials: BPA-free plastic
Weight: <250g
Inclusions:
Delter Coffee Press x 1 (Chamber / plunger / cap)
Paper Filters x 100pk
HEIGHT: | 180 cm - 5' 11ā |
BUST: | 83 cm - 32ā |
WAIST: | 57 cm - 22ā |
HIPS: | 88 cm - 35 |
SHOE SIZE: | 39 - 6 |
Note: you can configure unique tab per product
LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt
- Machine wash
- Mashine wash, permanent press
- Machine wash, gentle or delicate
- Hand wash
- Do not wash
- 30Ā°C or 80Ā°F
- 40Ā°C or 105Ā°
- 50Ā°C or 120Ā°F
- 60Ā°C or 140Ā°F
- 70Ā°C or 160Ā°F
- 95Ā°C or 200Ā°F
- 30Ā°C or 80Ā°F
- 40Ā°C or 105Ā°F
- 50Ā°C or 120Ā°F
- 60Ā°C or 140Ā°F
- 70Ā°C or 160Ā°F
- 95Ā°C or 200Ā°F
- Do not wring
- Bleach if needed
- Do not Bleach
- Non-chlorine bleach if needed
- Non-chlorine bleach if needed
- Trumble dry
- Dry normal, low heat
- Dry normal, mediun heat
- Dry normal, high heat
- Dry normal, not heat
- Hanf to dry
- Drip dry
- Dry flatĀ°
- Dry in the shade
- Don not dry
- Don not tumble dry
- Dry
- Do not dry Clean
- Iron any temp, steam
- Do not iron
- Maximum 110Ā°C or 230Ā°F
- Maximum 150Ā°C or 300Ā°F
- Maximum 200Ā°C or 390Ā°F
- No steam
- Dryclean
- Any solvent
- Except tetrachlorethylene
- Petroleum solvent only
- Wet cleaning
Note: you can configure same tab for all products at your store